infrared femtosecond laser
The Ablator-FNIR series of industrial-grade femtosecond fiber lasers is a proven, highly reliable, all-weather product. The laser supports the output power of up to 60W at the wavelength of 1030nm, the single pulse energy is >60μJ, and the minimum pulse width is 400fs. The laser has a built-in pulse selector for on-demand pulse frequency division, and can realize a variety of Burst Mode combinations.
sku:Ablator-FNIR
Category:Industrial Femtosecond Lasers
Description
The Ablator-FNIR series of industrial-grade femtosecond fiber lasers is a proven, highly reliable, all-weather product. The laser supports output power of up to 60W at 1030nm wavelength, single pulse energy >60 μJ, minimum pulse width 400fs, built-in pulse selector in the laser for on-demand pulse frequency division, and can realize a variety of Burst Mode combinations, Rugged, industrial-grade design ensures product stability and reliability.
Application:
Cutting, drilling, welding of hard and brittle materials
Micro and polymer material processing of metal materials
Processing of composite film materials
New energy material processing
Medical device manufacturing
Fiber grating writing and processing
Specification
| Technical parameters | |||
| Specifications | Ablator-FGreen-10 | Ablator-FGreen-30 | Ablator-FGreen-60 |
| Center wavelength | 1030 nm | 1030 nm | 1030 nm |
| Laser Power | >10 W@1MHz | >30 W@1MHz | >60 W@1MHz |
| Repeat rate | 1 Hz~2 MHz | 1 Hz~2 MHz | 1 Hz~2 MHz |
| Pulse energy | 10 µJ | 30 µJ | 60 µJ |
| Power stability | ＜1.0%@8 hours,rms | ＜1.0%@8 hours,rms | ＜1.0%@8 hours,rms |
| Laser pulse width | <400fs | <600fs | <700fs |
| Beam Quality | M²≤1.3 | M²≤1.3 | M²≤1.3 |
| Spot roundness | >85% | >85% | >85% |
| Burst number | 1~5 | 1~5 | 1~5 |
| Dimensions | 738x506x195mm³ | 738x506x195mm³ | 738x506x195mm³ |
| Frequency trigger method | PSO, POD and GATE modes are optional, TTL trigger | PSO, POD and GATE modes are optional, TTL trigger | PSO, POD and GATE modes are optional, TTL trigger |
| External power control | Yes, 0~5 V | Yes, 0~5 V | Yes, 0~5 V |
| Warm-up time | ≤15 min | ≤15 min | ≤15 min |
| Working humidity | <60%RH@25℃ | <60%RH@25℃ | <60%RH@25℃ |
| Operating temperature | 20~30 ℃ | 20~30 ℃ | 20~30 ℃ |
| Cooling method | Water cooling | Water cooling | Water cooling |
