Medical Picosecond Laser
Medical picosecond laser series 500mJ@1064nm /250mJ@532nm, 1-10Hz repetition frequency / 300ps pulse width is amplified by single-mode seed light injection, and the homogenized lens is coupled to the flat-top output.
sku:Medical-PS
Category:Medical Beauty Laser
Description
Medical picosecond laser Introduction
The Medical Picosecond Laser uses single-mode seed light injection for amplification, and the homogenized lens couples the flat-top output. The optical system and power supply system adopts the upper and lower layered structure, which contributes to the long-term transportation stability and reliability of the laser.
Medical picosecond laser application:
● Medical beauty
● freckle removal
● get tattoos
● Skin Pigmentation Treatment
Specification
|
Beam Characteristics |
||||
|
Project |
Medical-PS |
|||
|
Repeat rate1(Hz) |
1-10Hz |
|||
|
Energy (mJ) |
||||
|
1064nm |
500mJ |
|||
|
532nm |
250mJ |
|||
|
Energy stability (%) |
||||
|
1064nm |
1% |
|||
|
532nm |
2% |
|||
|
Power Drift2（%） |
||||
|
1064nm |
2% |
|||
|
532nm |
3% |
|||
|
Half-peak pulse width3(ps) |
||||
|
1064 nm |
300 ps |
|||
|
532 nm |
270ps |
|||
|
Divergence angle4(mrad) |
<1mrad |
|||
|
Spot size (mm) |
~10.5 |
|||
|
Spatial distribution of beams |
Top Beam |
|||
|
Polarity |
Linear |
|||
|
General Features |
||||
|
Power input |
220 VAC ±5% 50-60Hz |
|||
|
Energy loss |
＜1.0kW（500mJ@10Hz） |
|||
|
Working Conditions |
Temperature 20-35℃ humidity＜60% |
|||
Notes:
1. All characteristics are measured at 1064nm and 10Hz repetition rate unless otherwise noted.
2. Keep room temperature change less than 8 hours average.
3. The pulse width corresponding to half of the peak power.
4. 86.5% of the energy of the full angle.
